> >>Browse Combinations

Pemko TYPE14 Center Hung Floor Closer Threshold Assembly w/ Both Ends Mitered

Showing 1 - 50 of 50 items

Floor Closer Covers are thresholds used to cover floor closers. They must be properly fabricated to allow for the proper operation of the floor closer. No merchandise made for special order will be accepted for return or credit. When ordering, please provide the following information.

  • TYPE OF ASSEMBLY: Type 11 or Type 14 for center hung, Type 13 or 15 for offset hung.
  • CLOSER TO BE USED: Manufacturer and model number.
  • NET LENGTH: Jamb-to-Jamb. Assembly Type 11, 13 and 14 are cut with center hung section 1/2" over net length up to 48" and 1" over net length over 48" to allow for fitting on the job. Please be specify "net length", if required. Assembly Type 15 is cut net length because of factory-cut miters.
  • HANDING: For single doors, specify right or left hand. For pairs of doors, handing is not required.
  • SPECIAL FINISHES: Examples include polished, oxidized and oil rubbed, Satin Buff, and PemKote.
  • SPECIAL FASTENERS: (For center section only) Example include: MS and ES, FHLS25 and SS/MS&ES.
  • SPECIAL FABRICATION INSTRUCTIONS - Notching, full miters, etc. Assembly Type 11 is supplied without mitered ends and assembly Type 13, 14 and 15 are supplied with both ends mitered. Also, when stop strips (shown on page 21), specify door thickness and pivot offset so that the threshold assembly width and pivot dimension can be determined.

Size for Treshold Table

TypeSizeThresholdMaterial
14 1/2 × 7 176A Aluminum
14 1/2 × 7 176B Brass (Bronze)
14 1/2 × 7 176D Dark Bronze Anodized Aluminum
14 1/4 × 7 276A Aluminum
14 1/4 × 7 276B Brass (Bronze)
14 1/4 × 7 276D Dark Bronze Anodized Aluminum
14 1/2 × 8 2548A Aluminum
14 1/2 × 8 254X4B Brass (Bronze)
14 1/2 × 8 2548D Dark Bronze Anodized Aluminum
14 1/4 × 8 2748A Aluminum
14 1/4 × 8 274X4B Brass (Bronze)
14 1/4 × 8 2748D Dark Bronze Anodized Aluminum
14 1/4 × 9 2749A Aluminum
14 1/4 × 9 2749D Dark Bronze Anodized Aluminum
14 1/4 × 10 2750A Aluminum
14 1/4 × 10 2750D Dark Bronze Anodized Aluminum
14 1/2 × 8-3/4 193Ax2/195A Aluminum
14 1/2 × 8-3/4 193Bx2/195B Brass (Bronze)
14 1/2 × 8-3/4 193Dx2/195D Dark Bronze Anodized Aluminum
14 1/2 × 9 2549A Aluminum
14 1/2 × 9 2549D Dark Bronze Anodized Aluminum
14 1/2 × 10 2550A Aluminum
14 1/2 × 10 2550D Dark Bronze Anodized Aluminum
14 3/4 × 16 × 1/2 R.5OSMRA Aluminum
14 1 × 19 × 3/4 R.75OSMRA Aluminum
14 1-1/4 × 22 × 1 R1OSMRA Aluminum

Ratings

  • Barrier-Free
  • Fire Rated - UL10C - Positive Pressure

Documentation

Catalog (PDF)